hinabaloch
Mechanical
Hello Every one
I am using abaqus. The attached is my model. Can anyone knows how can I apply vibration on rigid surface in -ve z direction.
In step module I did apply frequency value 10. But no effect on rigid surface only effecting solid (semicircle)and results are weird.
Many thanks
Hina
I am using abaqus. The attached is my model. Can anyone knows how can I apply vibration on rigid surface in -ve z direction.
In step module I did apply frequency value 10. But no effect on rigid surface only effecting solid (semicircle)and results are weird.
Many thanks
Hina
