ProcessRookie
Chemical
Does anyone know if it is possible to carry out basic vibration measurement on a piping system which is insulated without removing the insulation?
Kind Regards,
PR
Kind Regards,
PR
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Vibration Monitoring
- Thread starter ProcessRookie
- Start date
- Status
Vibrations are transmitted very easily through the whole piping system so there are many options.
a. an uninsulated Flange
b. an uninsulated Valve Body
c. an Insulation Shoe where it touches a Pipe Support
d. a Probe (Nail, etc.) poked through the insulation
Get creative, you will find the answer.
Sometimes its possible to do all the right things and still get bad results
a. an uninsulated Flange
b. an uninsulated Valve Body
c. an Insulation Shoe where it touches a Pipe Support
d. a Probe (Nail, etc.) poked through the insulation
Get creative, you will find the answer.
Sometimes its possible to do all the right things and still get bad results
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question