Vertical load and lateral load trunnion lifting lugs

[Dream91]

Hello,

How I can apply lateral load and vertical load to the trunnion lifting lugs . Can I do it using compress software ?

 

[SnTMan]

Dream91, not familiar w/ Compress, but trunnions are typically treated as nozzles, analyzed per WRC-107.

Regards,

Mike

The problem with sloppy work is that the supply FAR EXCEEDS the demand

 

[r6155]

See DIN 28025 or Pressure Vessel Design Manual 4th edit., by D. Moss.

Regards
r6155

 

[r6155]

One mistake I made: see DIN 28085 (not 28025). SORRY.
DIN 28085 "Lifting lugs for mounting of vessels.... dimensions"

Regards
r6155

 

[MrPDes]

Compress software for Trunnion design is very restrictive. Compress is good however, Trunnion design is one area where Compress falls short.
It is best to use a Compress Nozzle design and set the Pressure SIF to 1.0.