Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vertical layers in AERMOD

Status
Not open for further replies.
FOH99

FOH99

Chemical
Joined
Aug 3, 2023
Messages
3
Location
PE
Hello, everyone, I would want to know how many vertical layers is recommended to use in the Meterological Profile file (PFL) to be used on AERMOD?
Maybe only two levels (2 and 10 meters) or should be more?
 
Status
Not open for further replies.

Similar threads

RussellCE
  • Locked
  • Question Question
RCP Storm Drain Installation - limited vertical clearance
Replies
9
Views
1K
udraft
udraft
A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX?
Replies
0
Views
7K
abrarnth
A
C
  • Locked
  • Question Question
Concrete in Bored pile head
Replies
4
Views
4K
BridgeSmith
BridgeSmith
T
  • Question Question
Thermal load with thermal gradient in structural analysis
Replies
6
Views
856
Amp Dylan
A
D
  • Locked
  • Question Question
rebar in the mortar between concrete blocks
Replies
3
Views
3K
JAE
JAE

Part and Inventory Search

Sponsor

Back
Top