Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

vendor to plate large plastic parts 3

Status
Not open for further replies.

HDS

Mechanical
Jul 25, 2002
661
I need a vendor that can chrome plate ABS bumper covers. The parts are very long about 6.5 ft. I would like someone with a tank deep enough to run the parts with a verticle orintation. They should obviously have automotive expereince.

TIA

 
Replies continue below

Recommended for you

Hi, welcome to the WORLD wide web. Which country/region? Cheers

Greg Locock
 
Guardian Automotive -
They have a good plating plant in Evansville Indiana.

They chrome alot of abs grille for the automotive industry, including the big truck grilles (freightliner).

Chris
 
Chr1s
Do you have a contact name there? I have not had good luck trying to find someone there over the phone.

everyone
For more detail I need someone with tanks deep enough for parts 76" long. I would prefer they were racked verticlely. They have a V section that traps air if racked horizontaly.

TIA
 
You may have better luck going starting with their Tech center in Warren, Michigan. That is where the Sales reps & account managers are.

23751 Amber Street
Warren, MI 48089
1-810-757-7800
1-810-757-8329 (fax)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor