coatingsguy
Materials
I'm looking for a vendor to purchase aluminum source material for a coating process. I'd like the aluminum to be alloyed with another material such as cobalt or chromium, in chunklet form. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Vendor for aluminum donor material 2
- Thread starter coatingsguy
- Start date
- Status
-
2
- #2
Recently, I found a very good website that can be very useful to you.
It is basically an engineering search engine where one can find all sorts of information. I was looking for a ceramics supplier and I found one there. I definitely reccomend to all to check it out
Coka
It is basically an engineering search engine where one can find all sorts of information. I was looking for a ceramics supplier and I found one there. I definitely reccomend to all to check it out
Coka
- Thread starter
- #3
I haven’t seen the alloys combinations you mention, but this is no sign they aren’t out there.
You might want to check the website or contact the following companies. They are from the same group. Check some of their links to other sites like Shieldalloy.
You might want to check the website or contact the following companies. They are from the same group. Check some of their links to other sites like Shieldalloy.
- Status
Similar threads
- Locked
- Question
- Question
