Variable rads

[danlamb]

In edge blend you can put in a variable rad for example a 5mm radius in one corner of a edge down to a 1mm radius in the other corner of a edge. Is there a way to do this in face blend if so how can I do this?

Thank you.

Regards Daniel lamb

 

[carlharr]

Hi Daniel,

You can do it in the normal edge blend command in NX8.5.

Regards Carl

http://www.jcb.com

NX 8.5 with TC 8.3

 

[cowski]

In the face blend command, change the radius method to "law controlled"; this will open up options for controlling the radius along the blend path.

www.nxjournaling.com

 

[carlharr]

Wonder if I can delete my previous post for not reading the question properly. It's been a busy day!

http://www.jcb.com

NX 8.5 with TC 8.3

 

[JohnRBaker]

Just 'Red Flag' it and ask that it be removed. Of course you'll need to ask that your second post, asking how to remove the post, and mine, telling you what to do, also will need to be removed ;-)

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[carlharr]

And this one John, thanking you for the info.

Perhaps I'll just leave it there for all to see my error.

http://www.jcb.com

NX 8.5 with TC 8.3