Feb 2, 2015 #1 williamsf Electrical Joined Feb 2, 2015 Messages 1 Location DM can a variable frequency drive help in mitigating the problems associated with the use of a 60 cycle motor on 50 cycles?
can a variable frequency drive help in mitigating the problems associated with the use of a 60 cycle motor on 50 cycles?
Feb 2, 2015 #2 Skogsgurra Electrical Joined Mar 31, 2003 Messages 11,815 Location SE Very probable. Yes. But it depends a lot on what the problems are. Sometimes, it is possible to run without any problems at all and sometimes you may need to compensate for the lower speed. Gunnar Englund http://www.gke.org-------------------------------------- Half full - Half empty? I don't mind. It's what in it that counts. Upvote 0 Downvote
Very probable. Yes. But it depends a lot on what the problems are. Sometimes, it is possible to run without any problems at all and sometimes you may need to compensate for the lower speed. Gunnar Englund http://www.gke.org-------------------------------------- Half full - Half empty? I don't mind. It's what in it that counts.
Feb 2, 2015 #3 mikekilroy Electrical Joined Feb 18, 2012 Messages 669 Location US williamsf, it would help if you LIST what these problems are that you feel need to mitigate? Then specific answers can be given to each. http://www.KilroyWasHere<dot>com Upvote 0 Downvote
williamsf, it would help if you LIST what these problems are that you feel need to mitigate? Then specific answers can be given to each. http://www.KilroyWasHere<dot>com
Feb 5, 2015 #4 sandeepelect1 Electrical Joined Feb 5, 2015 Messages 3 i agree with mikekilroy, Please, make your question more specific. Upvote 0 Downvote