pardal
Automotive
- Oct 17, 2001
- 444
How it is named a proces that insufles water steam by the botton and after a few seconds it is evacuated by vacuum?
It is done by locating the fabric after weabing , about 3 FT by 3Ft, on a perforated plate apply steam form the botton of plate and then evacuating the remaining steam as to dry the fabric prior to the cutting to sew the piece.
The fabric is Brand name CASHMILON.
If you can direct me to a supplier , better.
thanks in advance.
Pardal
It is done by locating the fabric after weabing , about 3 FT by 3Ft, on a perforated plate apply steam form the botton of plate and then evacuating the remaining steam as to dry the fabric prior to the cutting to sew the piece.
The fabric is Brand name CASHMILON.
If you can direct me to a supplier , better.
thanks in advance.
Pardal