Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valves for LPG shutoff

Status
Not open for further replies.

PacificSteve

Mechanical
Dec 22, 2001
84
US
OK here is an easy one, I think.

What type of valve should be used for LPG shutoff. Pressures are expected to be 10PSI on the "primary" and 10"WC on the secondary. I'll need valves in both locations.

These valves would be located outdoors.

Also does any know of any requirements for EPO emergency power off switches for hot water heaters, LPG fired, in which the input is 150MBTUH

Thanks

PacificSteve
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top