Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valve Poppet and Seat Design

Status
Not open for further replies.
jhoule2

jhoule2

Automotive
Joined
Aug 13, 2001
Messages
1
Location
CA
For high pressure natural gas regulation.

I am looking for a resource that discusses the pros and cons of material combinations for a poppet seat set.

Any suggestions are appreciated (including published tech papers).
 
Status
Not open for further replies.

Similar threads

Inchtain
  • Question Question
Seat Rings of small and big size ball valves
Replies
3
Views
3K
Danlap
Danlap
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
TiCl4
  • Locked
  • Question Question
Valve Seat/Stem Material for Monomer Service
Replies
7
Views
2K
shvet
shvet
trentar
  • Question Question
numerical example of valve design calculations acc to iso en 15761
Replies
0
Views
6K
trentar
trentar
neroverdi41
  • Locked
  • Question Question
Control Valve and Diaphragm Actuator Force Calculation
Replies
4
Views
3K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top