Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacuum Unit Transfer Line

Thread starter KazakhJeff
Start date Mar 27, 2003

Status: Not open for further replies.

Mar 27, 2003

KazakhJeff

Chemical

I am seeking advice for recommended suppliers for Transfer Lines (furnace to tower) for a Vacuum Dist Unit. Metallurgy is 15% Cr, 5% Mo. Diameter 600 mm. Location Kazakhstan, Central Asia, therefore most likely source is Central or Eastern Europe. Any suggestions please.