Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacuum Relief Valve

Status
Not open for further replies.
tercalla

tercalla

Civil/Environmental
Joined
Jul 19, 2006
Messages
5
Location
US
...or any valve that spits, for that matter.

Anyone have a good/easy/cost effective way to minimize or capture the spit from a valve? Please reply with mfgs of capture insturments, if you can think of any.

Thanks!
 
Sort by date Sort by votes
We always ran the exhaust line from auto-vents and vacuum breakers with 1/4" or 1/2" tubing to the nearest available floor drain that was easy because it had NPT connection. Appearently your situation is different or you would have done that.

I'm not a real engineer, but I play one on T.V.
A.J. Gest, York Int./JCI
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dogboy74
  • Locked
  • Question Question
Dust/debris in my vacuum pump lines
Replies
14
Views
1K
Artisi
A
P
  • Question Question
Check valve on fuel return line - NFPA 20
Replies
5
Views
4K
TugboatEng
TugboatEng
vasicmilos
  • Locked
  • Question Question
Vacuum pump oil
Replies
14
Views
2K
vasicmilos
vasicmilos
AnjanaK
  • Locked
  • Question Question
Selecting Vacuum Pump for the Vacuum Belt Conveyor Design
Replies
1
Views
324
LittleInch
LittleInch
moideen
  • Locked
  • Question Question
DRV plus ISOLATION VALVE on pump discharge line
Replies
12
Views
1K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top