Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

v20 standard parts library issues

Status
Not open for further replies.

Alanmcd

Military
Joined
Mar 5, 2008
Messages
1
Location
US
We've been having an ongoing problem loading and using the Solid Edge v20 standard parts library to our server. Has anyone else encountered issues? For an example, the entire library will not load, only parts of it. Another example, when placing one of the parts that did load it's a gamble as to whether or not it will actually place the part or error out. We've been dealing with our local VAR and Siemens/UGS to resolve this and the VAR is stumped. Still waiting on Siemens.
 
We had the same issues, getting the standard parts on the server. We had to have our local rep come in and do the install for us. It took him 2 days on the phone with UGS but it finally works now. All i can say is that once your VAR gets in tie him to the chair and don't let him leave till it works. Good Luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top