Has anyone else out there used thermography for verifying grout fill in CMU walls? I have done a couple projects in this area now and the results are excellent. And if so, with this type of result, as an Architect or Structural PE why wouldn't you want to do it on every CMU wall to guarantee the integrity of the structure as designed?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using Thermography for Masonry NDT
- Thread starter Thorbo
- Start date
JKEngineer
Chemical
It's a well established application. Lot of companies use it. Others aren't as smart.
Jack
Jack M. Kleinfeld, P.E. Kleinfeld Technical Services, Inc.
Infrared Thermography, Finite Element Analysis, Process Engineering
Jack
Jack M. Kleinfeld, P.E. Kleinfeld Technical Services, Inc.
Infrared Thermography, Finite Element Analysis, Process Engineering
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question