Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
using the same sketch in diferent functions 1
- Thread starter pascual
- Start date
-
1
- #2
This is easy. Save the sketch as a .sec or section file by hitting the SAVE A COPY icon. Then use the DAT FROM FILE command in the sketch menu of the next sketch.
It will come in and you canscale it and rotate it. You will have to redo dimmensions and constrants.
The other way to do it is copy the features you want to use or create the skecth in a dataum curve and reference that curve in the different features. This would make the two features update together when the curve is changed. ProEpro
It will come in and you canscale it and rotate it. You will have to redo dimmensions and constrants.
The other way to do it is copy the features you want to use or create the skecth in a dataum curve and reference that curve in the different features. This would make the two features update together when the curve is changed. ProEpro
- Status
Similar threads
- Question
- Solved
- Locked
- Question
- Locked
- Question