Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using the blind hole command

Status
Not open for further replies.
danoo

danoo

Mechanical
Joined
Jul 27, 2007
Messages
26
Location
US
When creating a blind hole, is the away to show drill point without creating another feature.

Thanks,
Danoo
 
Sort by date Sort by votes
Yes. In WF2. Add "hole_diameter_override yes" to your config.pro file. Use the tapped hole feature and uncheck "include thread surface" in the shape dialog box. Change the tap drill diameter to the diameter you want.

Bob
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

L
  • Solved
Using JLink (Java OTK Free) to Run Predefined FEA Simulation
Replies
6
Views
9K
lm222
L
CAD2015
  • Locked
  • Question Question
Which are the main Electrical Design modules?
Replies
2
Views
2K
CAD2015
CAD2015
Sidtha
  • Locked
  • Question Question
How to get the Balloon Position from CATIA V5 Drawings using VBA
Replies
1
Views
1K
looslib
looslib
CAD2015
  • Question Question
I want to know what the latest version is in Creo Parametric
Replies
0
Views
6K
CAD2015
CAD2015
engineeringspread
  • Locked
  • Question Question
Single Hole Pattern from sketch
Replies
1
Views
714
DesEng1986
DesEng1986

Part and Inventory Search

Sponsor

Back
Top