Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using HY8 for 3-Sided Culverts

Status
Not open for further replies.
RedRanger

RedRanger

Civil/Environmental
Joined
Feb 2, 2006
Messages
1
Location
US
Does anyone know if you can use HY8 to design a 3-sided flat top culvert? I know you can design an arch, any help would be appreciated.
 
Status
Not open for further replies.

Similar threads

Hydro_TX-QC
  • Locked
  • Question Question
Include culverts in a peak runoff rate calculation?
Replies
1
Views
936
gbam
gbam
CanuckPE
  • Locked
  • Question Question
Hydraulic Area - Converting a box culvert to a series of circular culverts
Replies
3
Views
1K
Ekenny_G
Ekenny_G
meatymatt
  • Locked
  • Question Question
Do you consider "breakout" when designing infiltrators for roof runoff?
Replies
1
Views
4K
swazimatt
swazimatt
backseatpockets
  • Locked
  • Question Question
Runoff coefficients for sloped regions and hydraulic soil groups
Replies
2
Views
5K
backseatpockets
backseatpockets
Dersnerman
  • Locked
  • Question Question
Help with Design Resources for Small Overflow Weir Design - Hydropower & Microhydropower
Replies
3
Views
10K
gbam
gbam

Part and Inventory Search

Sponsor

Back
Top