USER FATAL MESSAGE 1129 (GNLOC)

[federica88]

Hi at all! I have problem with an static aeroelastic analysis.
This error occurs:


SOL AESTAT
TIME 10000
CEND
*** USER FATAL MESSAGE 1129 (GNLOC)
THE FILE ASSIGNMENT (DBSPACE) TABLE CONTAINS NO ENTRY FOR LOCATION PARAMETER AEDBX = DBALL
USER INFORMATION:
1. GNLOC PERFORMS MODULE FILE ALLOCATIONS
2. THE DBSET DBALL WAS NOT ALLOCATED FOR THIS RUN
PROGRAMMER INFORMATION:
THE FULL DBDIR RECORD CONTAINING THIS LOCATION PARAMETER IS:
0 0 0
0FATAL ERROR

There is anyone that can help me? Thank you!!

 

[hezhj2000]

Are you using Nastran version earlier than 2008? There is a similar bug that has been fixed in Nastran 2008. You can try with Nastran 2008+ to see if the error will go away.

 

[starched]

Try to delete all the files with the same name (except .db and .bdf) and try to run it again. It worked for me