Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

user defined settings

Status
Not open for further replies.

pamccrac

Mechanical
Joined
Sep 17, 2004
Messages
49
Location
US
IT is going to "reload" NX for me (due to other problems for another thread) and I'm wondering if there is a file (or files) with my user defined settings that I can "grab" before this takes place and then "replace" after the reload? I'm sure there is, but what and where, not sure. any help would be much appreciated.


Patrick McCracken
CNC Programmer
 
What version and what settings. If it is just your icons then the ".mtx" file, is created by saving your role post NX-4 and earlier the file will be in you user profile directories and called "user.mtx"

BTW if they re-install you OS you'll lose your icons if they just re-install UG then they shouldn't be affected, as they live elsewhere.

Best Regards

Hudson
 
Take a look at this:
And:
When you start up NX look at the log file, search for the environment variables in the links above and copy your user specific settings.

Depending on the size of your company, I would look at having this set on a shared location so machines can come and go, but your settings will stay persistent to your login (on any machine).

-Dave Tolsma
Tolsnet LLC
 
thanks! I will review the info for NX3.

Patrick McCracken
CNC Programmer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top