Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

use of waste hydraulic oil

Status
Not open for further replies.

masher

Industrial
Joined
Feb 25, 2005
Messages
1
Location
IE
i want to use waste hydraulic oil to heat a warehouse.has somebody done this ? also if possible to use this oil in a small burner to heat a greenhouse at home ! can a mod be made to existing oil/keresine burner/boiler . what temp does the hyd oil need to burn efficiently etc etc
 
I would try to run the question by the oil supplier/manufacturer, first. My concern is that the oil may have additives (or contaminants, ie, metals) where they simply don't recommend burning it, period, at least in a situation where emissions can't be easily monitored or controlled.

If you ever notice on a gas pump, the labels say "For use as a motor fuel only"- ie, they don't recommend using it in your Coleman lantern due to the additives in it. Perhaps similar issues here.
 
Generally I encounter the opposite question, They have waste oil and want to use it like hydraulic oil. Their first option is used motor-oil sigh...

Steven van Els
SAvanEls@cq-link.sr
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top