Does anyone have any experience in using inline refractometers? If so, how reliable are they? I'm looking into using refractometers to measure solids of our spent and product liquor. The solids range from 10% to 70%, and the temperature can peak at approximately 250 degrees. The liquor is spent chemicals from pulping wood in an ammonium bisulfite cook. Thanks in advance for any advice.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Use of refractometers on high solids solution
- Thread starter antwaun
- Start date
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Locked
- Question