Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

US KKS Training

Status
Not open for further replies.

Iyabo

Mechanical
Jul 10, 2007
3
Hi,

Does anyone know if there is a company or a group in the United States that offers a training session in the KKS tagging system for power plants?

Thanks
 
Replies continue below

Recommended for you

Iyabo
KKS tagging system, as far as I know is only taught by the OEM’s from Europe, That would be Siemens and ABB or Alstom Power. I was taught the system by both companies however I think there may be somewhere you can purchase a book to teach you. I would think if you were working in a power plant that used hardware from either of the above companies, there would be a Tab in one of the user’s manual that introduces you to the KKS system.

Why do you need to know this system?

Romefu12
 
I'm working on a plant in the Middle East and they require KKS.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor