IceMan30
Military
- Jan 19, 2011
- 32
Hey All,
So here's my problem: I need to read binary data over a closed wireless network into LabVIEW. I know (or will know) the IP address/Port # for where the data is coming from. This will be live, streaming binary data that I will then have to convert into an array or matrix or whatnot, in order to pick off the data I need.
I'm working through the binary data read/conversion once I have the data, that seems ok. Where I need some help is with the network data read. I'm not really that good with network-anything, and I'm getting pretty confused with the stash of LabVIEW network VI choices.
Any help would be appreciated. Suggested VI's, what should be connected where, etc.
So here's my problem: I need to read binary data over a closed wireless network into LabVIEW. I know (or will know) the IP address/Port # for where the data is coming from. This will be live, streaming binary data that I will then have to convert into an array or matrix or whatnot, in order to pick off the data I need.
I'm working through the binary data read/conversion once I have the data, that seems ok. Where I need some help is with the network data read. I'm not really that good with network-anything, and I'm getting pretty confused with the stash of LabVIEW network VI choices.
Any help would be appreciated. Suggested VI's, what should be connected where, etc.
