Update mass props macro

[beachcomber]

Anyone know of a macro that opens model files and updates the mass properties ?
Something like the 'OpenSave' macro.
It's a pain having to find which models haven't had the mass calculated and then doing each one individually.

bc

 

[krzysiek]

I can't find it- but there was a site 'seguru' segooru'? I got asmmass.exe from them. It works.
But I don't need it. Open dratf and go to the part. When you change dimensions of part - click 'save' and back to draft. Msss must be changed automatically. (SE18)

 

[ksudavid]

beachcomber,

Look into the TreadTools macro available here:

http://www.barhamsoftware.com/SE_Tools/index.htm

You can use TreadTools in combination with the OpenSave Macro to achieve what you want.

Also here is the link to the SeGuruCool website:

http://www.geocities.com/segurucool/

 

[beachcomber]

Thanks guys,
I'd already looked at segurucool but couldn't find anything to do the job.
I'll try 'treadtools' and let you know if it does the job.

bc