Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unreinforced Masonry There's a series of papers published as AB

Status
Not open for further replies.
connect2

connect2

Structural
Joined
Dec 24, 2003
Messages
306
Location
CA
There's a series of papers published as ABK 1981a, 1981b, and 1984, dealing with Mitigation of Seismic Hazards in URM buildings. The first paper deals with diaphragm testing, the second with wall out-of-plane loading and the third with the overall methodology. Agbabian, Barnes, Kariotis were/are the respectve ABK Consultants. Anybody seen them? Does anybody know where they might be downloaded?
Thanks
 
Status
Not open for further replies.

Similar threads

s4lmonsushi
  • Locked
  • Question Question
AS3700 Unreinforced Masonry Horizontal Bending - Difference Between Zd and Zu/Zp
Replies
0
Views
752
s4lmonsushi
s4lmonsushi
M
  • Question Question
Effective length of masonry wall (Leff) as required in BS 5628-1
Replies
1
Views
2K
HTURKAK
HTURKAK
DTS419
  • Locked
  • Question Question
When does a uniform load become a series of point loads?
Replies
7
Views
4K
DTS419
DTS419
SteelPE
  • Question Question
Masonry Wall Construction
2
Replies
27
Views
5K
dold
dold
pdzeng
  • Question Question
Shear load distribution across group of resin fixed studs in masonry
Replies
1
Views
6K
XR250
XR250

Part and Inventory Search

Sponsor

Back
Top