Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unit of measurement for knowing the resistance to galling?
- Thread starter Uralsk
- Start date
EdStainless
Materials
pressure, like ksi or MPa.
But each test set up has its own base line.
You can't compare data from two different tests unless they were done using same machine and test setup.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
But each test set up has its own base line.
You can't compare data from two different tests unless they were done using same machine and test setup.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question