We ordered 2" Union class 3000, A350 LF2. Our specs mentions dimensions as per ANSI B16.11. But the manufacturer is informing that ANSI B16.11 does not cover unions. It covers only elbow, cross, tee, couplings. As per the manufacturer, the unions will be offered as per the dimensional specs BS3799. Please advise if this is correct
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
UNION 2" CLASS 3000
- Thread starter kpm21443
- Start date
EdStainless
Materials
Have you read both specs? If not then why ask us.
You put something down as contract term and you don't even know if it applies.
Your bad.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
You put something down as contract term and you don't even know if it applies.
Your bad.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question