Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

uni 3740

Status
Not open for further replies.
Tagger

Tagger

Mechanical
Joined
Aug 10, 2001
Messages
47
Location
US
I have an Italian drawing of a double end stud where in the material spec. has 10.9 UNI 3740. I assume the bolt should conform to Class 10.9. Can anyone steer me in the direction or give explanation for the Italian standard UNI 3740.
Thanks!
 
Sort by date Sort by votes
The classes in UNI 3740 correspond to ISO 898 and Yes, it's Class 10.9. The material should be galvanized steel, but I'm not completely sure about that.
 
Upvote 0 Downvote
It is highly unlikely that hot dip galvanizing or zinc electroplating (sometimes referred to as galvanizing by non-English speakers) would be specified with property class 10.9 fasteners due to the risks of hydrogen embrittlement.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
interpretation of unilateral tolerance defined with ISO standard
Replies
0
Views
2K
imanoj23
I

Part and Inventory Search

Sponsor

Back
Top