Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Undocked Navigator stuck off screen?

Status
Not open for further replies.

Kenja824

Automotive
Nov 5, 2014
950
We use two monitors here and a lot of guys will undock one of their navigators and slide it to the other screen.
However, many of us have two different sized monitors and one gentleman slid his navigator window to the smaller screen and let go when the top of the window was still off the screen of the smaller monitor. Now it sits on the small monitor with only the bottom half of the window showing and we cant grab anything to move it or dock it again.

We have tried messing with resolution and switching monitors and everything. Nothing seems to work.

Is there a setting to switch all undocked navigator windows to being docked?

Has anyone had to deal with this before?
 
Replies continue below

Recommended for you

Ok, never mind. Kill this post if you can. I have had the luck lately that after working on a problem for a long time and finally giving up, as soon as I post the question here, someone figures it out.

We had switched it to one screen trying to get everything to come in right and it didnt work. When he switched it back to two screens again, it reset everything and it appeared in the middle. I was so close to figuring it out and only needed to switch it back again to make it work. lol
 
You can delete your own posts, if you don't wait too long. Check the lower right corner of your post:

Screen_Shot_2017-10-19_at_11.16.25_AM_yboipe.png


John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor