Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Underline Lineweight in a Note

Status
Not open for further replies.
sauersjm

sauersjm

Mechanical
Joined
Jan 25, 2007
Messages
12
Location
US
I just recently started to have this problem. When I create a note and choose to have it underlined, the lineweight of the underline is very thick. Any ideas on where to adjust this?
 
Sort by date Sort by votes
It's controlled at the font level. Try using a different font or it could be the graphics. So make sure your are using the correct drivers and certified card.

If you do a print of file is the underline still think? If not then its just a graphic issue.

Regards,

Scott Baugh, CSWP [pc2]
faq731-376
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

V
Problem to open a .obj file with the textures visible on the model in Solidworks 2022
Replies
0
Views
78
victor andreevich
V
CAD2015
  • Locked
  • Question Question
Rotate a view in the direction of a line..................
Replies
17
Views
1K
jassco
jassco
jassco
  • Locked
  • Question Question
Solidworks VBA to GET and SET dimensions on a sketch in an assembly model
Replies
1
Views
2K
jassco
jassco
CAD2015
  • Locked
  • Question Question
How to count the components in a SolidWorks assembly?
Replies
8
Views
2K
CAD2015
CAD2015
K
  • Question Question
Solidworks Assembly - Using Mass Properties of part instance to control dimensions of parts in assembly
Replies
3
Views
3K
jassco
jassco

Part and Inventory Search

Sponsor

Back
Top