Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to add heat generation to a material | Abaqus/CAE Student Edition 2019

Status
Not open for further replies.
JakeDorin

JakeDorin

Nuclear
Joined
Apr 11, 2020
Messages
1
Location
US
Hello,
I'm very new to using Abaqus. I picked it up for a project my group is working on for heat transfer analysis and I've run into a bit of an issue.
064f0fe61d89dee6f8489b5ffc6225c3_hy64ox.png

As you can see in the image, I can't add heat generation. Is there any way to fix this?
 
Sort by date Sort by votes
This option requires HETVAL subroutine. User subroutines are not available in Abaqus Student Edition.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
397
mj345
mj345
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top