Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ul50E gasket material / source

Status
Not open for further replies.
rmetzger

rmetzger

Mechanical
Joined
Dec 2, 2004
Messages
200
Location
US
We are looking for a foam gasket material for a outdoor electrical enclose that is UL50E listed. Our preference is for a extruded round cord in neoprene or silicone of approx .100" diameter. Anyone have any good sources for UL50E material that is not cut from sheet? Custom extrusions would not be a problem to get the correct size if we can find a place that carries material with the necessary listing.

thanks
 
Status
Not open for further replies.

Similar threads

Finglas
  • Question Question
Electrical Panel Hood Gasket
Replies
0
Views
307
Finglas
Finglas
SAEEDGH
  • Locked
  • Question Question
very low temperature gasket maker (-100)
Replies
1
Views
1K
satthepbienhoa
satthepbienhoa
Ramadan Ahmed
  • Locked
  • Question Question
Rubber Gasket Sealing Thickness and Clearance
Replies
0
Views
703
Ramadan Ahmed
Ramadan Ahmed
Sengalraja
  • Locked
  • Question Question
Gasket Sealing - Bolt spacing and bolt count
Replies
0
Views
640
Sengalraja
Sengalraja
Ramadan Ahmed
  • Locked
  • Question Question
IP68 Rubber Material
Replies
4
Views
1K
satthepbienhoa
satthepbienhoa

Part and Inventory Search

Sponsor

Back
Top