Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

uinter - basic example

Status
Not open for further replies.
rupertfe

rupertfe

Civil/Environmental
Joined
Oct 10, 2008
Messages
13
Location
AT
Dear all,

is there anywhere an example for an user subroutine UINTER for 3d solids ?
Good would be a comparable one (to the built ins) like hard (n) and rough (t) or soft (n) and penalty (t)contact ...

Thanks in advance,
Rupert.
 
Status
Not open for further replies.

Similar threads

Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
AminKB
  • Locked
  • Question Question
Example on using stiffness matrices in Abaqus
Replies
3
Views
802
FEA way
FEA way
SM1994
  • Locked
  • Question Question
issues with abaqus example "Fully coupled thermal-electrochemical procedures"
Replies
1
Views
303
FEA way
FEA way
GovindRb
  • Locked
  • Question Question
ABAQUS EXAMPLE PROBLEM "TREAD WEAR SIMULATION USING ADAPTIVE MESHING IN ABAQUS/ STANDARD"
Replies
6
Views
494
FEA way
FEA way
jzeds
  • Locked
  • Question Question
Basic Q:How to get smooth output data
Replies
1
Views
146
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top