Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Basic Q:How to get smooth output data

Status
Not open for further replies.
jzeds

jzeds

Mechanical
Joined
May 28, 2020
Messages
16
Location
IR
Hi. abaqus shows the plot in low res, with minimum points.
as shown in picture a huge jump from 0 to 70 is observed
what do i need to do to resolve?
Dynamic Explicit solver will be used
Capture_gnlkbc.png
 
Sort by date Sort by votes
Increase the output frequency. This can be done in output request editor.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
ruzfactor
  • Locked
  • Question Question
How to get Section Point Outputs for shell elements in Abaqus 6.10 ?
Replies
3
Views
913
FEA way
FEA way
Oluwakay
  • Locked
  • Question Question
non-smooth graph
Replies
4
Views
356
Oluwakay
Oluwakay
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
ABAQUS output result inconsistency with input data
Replies
5
Views
491
abc123ali
abc123ali

Part and Inventory Search

Sponsor

Back
Top