Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Basic Q:How to get smooth output data

Status
Not open for further replies.

jzeds

Mechanical
Joined
May 28, 2020
Messages
16
Location
IR
Hi. abaqus shows the plot in low res, with minimum points.
as shown in picture a huge jump from 0 to 70 is observed
what do i need to do to resolve?
Dynamic Explicit solver will be used
Capture_gnlkbc.png
 
Increase the output frequency. This can be done in output request editor.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top