Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UGENS/VUGENS: how to define the section behavior of shell element in ABAQUS explicit analysis?

Status
Not open for further replies.
SD91

SD91

Materials
Joined
Jun 24, 2017
Messages
1
Location
DE
dear all,

I'm trying to analyze the pure bending behavior of a woven fiber shell element(S4R), and I need to introduce subroutine to define the section behavior. But why abaqus does not have VUGENS for a explicit analysis, only UGENS is available for a standard analysis to define the section behavior?

or is there some methods that we could transfer UGENS to VUGENS?
 
Status
Not open for further replies.

Similar threads

jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
754
FEA way
FEA way
S
  • Locked
  • Question Question
How to Properly Implement Viscosity in SPH Using ABAQUS Explicit Analysis?
Replies
1
Views
2K
FEA way
FEA way
E
  • Question Question
Shell to shell constrains
Replies
2
Views
3K
erselvasajitha
E
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S

Part and Inventory Search

Sponsor

Back
Top