Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UG Part Families

Status
Not open for further replies.
fred2002

fred2002

Mechanical
Joined
Mar 6, 2002
Messages
36
Location
GB
Is it possible to create Assembly families using the part families tools? They would have to be capable of being called up in UG Routing.

Another website I have looked at mentions using placeholders.

Has anyone got any hints or tips, please?

Thanks.

BTW, I am using UG v16.
 
Status
Not open for further replies.

Similar threads

Befuddled
  • Locked
  • Question Question
Part Families - Threads (symbolic . Detailed)
Replies
2
Views
1K
Toost
Toost
A
  • Locked
  • Question Question
Has anyone attempted to use Animation Designer and Part Families on the same file?
Replies
1
Views
3K
Kenja824
Kenja824
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
2
Views
5K
DaveFig
D
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
P
  • Locked
  • Question Question
Part Family Siemens NX & TC synchro issue
Replies
1
Views
1K
Piotrek947
P

Part and Inventory Search

Sponsor

Back
Top