UG drating file

[BABUGOUDA]

Hello,

I need some help on UG Drafting
1.i exported w UG drating file to dwg or dxf. then opened in catia v5, some of the views are missing. please let me know any settings i m missing

2. how to get the non associated views --isolated views like in catia v5.
3. how to make the views to geometry like in catia v5 duplicate geometry. i need this compare the views sections as i do this in catia v5.. i need like just lines or splines as if we drawn manually in drafting application

ugnx8

thx
Pat..

 

[SvenBom]

What do you use for export? File->Export->DXF/DWG or File->Export->2DExchange? With 2DExchange, I get much better results. And also, with 2DExchange, you can also save the drawing as new NXpart. Doing so, the drawing will not have any link to the model.

 

[BABUGOUDA]

thank u very much SvenBom... i got all views with File->Export->2DExchange.. thank u very much again

so my 2nd question is while working in UG drafting . i need the views to be non associative , is there any option??

UGNX8

THX
PAT

 

[BABUGOUDA]

hi
Can any body know ? while working in UG drafting . i need the views to be non associative , is there any option??

UGNX8

THX
PAT

 

[cowski]

I used the search tool and searched on the term "non associative view", here are the first 2 threads that came up.
thread561-346485
thread561-348573

www.nxjournaling.com