Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UFF 58 3

Status
Not open for further replies.
SrinivasAluri

SrinivasAluri

Mechanical
Joined
Jun 24, 2004
Messages
62
Location
IN
I am trying to create a UFF 58 format file for FRF's. Does the data that goes in the UFF 58 have to be in Mag/Phase format or Real/Imag. format?
 
Sort by date Sort by votes
Yes it is real and imaginary.

M

--
Dr Michael F Platten
 
Upvote 0 Downvote
Thanks for the replies.. I had one more question, the data is in six column format.. How is the data supposed to be written, top to bottom or left to right?
 
Upvote 0 Downvote
left to right. it's designed for teletypes, top to bottom would blow them up!

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Upvote 0 Downvote
I was able to create the header for the UFF 58 file, however I am confused about the spacing between parameters starting at Line 6, for example if I have
4 0 0 0 NONE 1 3 NONE 1 3

for Line 6, Is the spacing between each of these "tab" spacing? or Is it something else?

I tried reading the spec from SDRL website but couldn't get anything. I appreciate any input.. Thanks
 
Upvote 0 Downvote
I figured that the Format is specified in FORTRAN. I could create the UFF58 files for my data. Dr. Platten and Greg Locock: Thank you for your inputs..
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top