Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCS-66 Impact Test Governing Thickness

Status
Not open for further replies.
wsmith22

wsmith22

Mechanical
Joined
Nov 9, 2005
Messages
67
Location
US
Is interpretation VIII-1-89-308 valid?
Per UCS-66(a)(1)(b), 2 components welded to form corner joint, the thicker material exceeds 4 in, the thinner material is =<4", impact testing is required. This does not agree with the way UCS-66(a)(1)(b) is written?

 
Sort by date Sort by votes
Our AI lists that interpretation as "Caution - questionable". Pending further clarification, to be safe I would assume that it is invalid.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Q
  • Locked
  • Question Question
ASME B 31.3 Impact test Exception API 5L PSL2 GR B
Replies
2
Views
3K
QAQC33
Q
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
nashki
  • Question Question
Thickness Hub at the Small End, g0
Replies
5
Views
8K
r6155
r6155
Santiago Vacca
  • Locked
  • Question Question
Per B31.3 Impact test exemption of weld metal below (continuation of closed thread292-509093)
Replies
2
Views
783
Santiago Vacca
Santiago Vacca
Hemsel
  • Locked
SA-537 CL 2, Thickness limitation
Replies
0
Views
760
Hemsel
Hemsel

Part and Inventory Search

Sponsor

Back
Top