Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

U.S. Siesmic Zones

Status
Not open for further replies.

7897

Mechanical
Jan 16, 2002
15
Has anyone heard of a siesmic zone 8 in the United States? a co-worker insists there is a zone 8 but I don't think so. If one does exist, can someone provide me with some information?

Thank you.
 
Replies continue below

Recommended for you

7897:

SEISMIC ZONE 8!?? [shocked] UBC only goes to zone 4, which is the highest I've ever heard of.

jproj
 
There are only seismic zones 1 through 4 in UBC. This is up to UBC-97. However, the new 2000 IBC seismic design provisions does not use seismic zones to establish design earthquake loads any more. Instead IBC uses a parameter called Seismic Design Category for imposing design and detailing requirements. Seismic Design Category of a structure is a function of three parameters: probable site ground motion, the type of soil at the stucture site, and the building occupancy category.
 
Ask if they mean Richter Magnitude 8 or Mercalli Intensity 8?
They might.
 
Just being picky, amokhta, but actually the seismic zones in the US vary from 0 to 4, not 1 to 4.
 
JAE: Thank You. You are right. It was a typo on my side.
 
Here are two links that may be helpful:


maps_ubc.gif



has the
DRAFT USGS NATIONAL SEISMIC HAZARD MAPS, JANUARY 2002


usmapE1.gif
 
In the AASHTO Standard Specifications for the Design of Highway Bridges, Division 1A - Seismic Design, they divide the U.S. into for Categories; A thru D. Almost everything East of Nevada is Category A.

It sounds like your friend is mixed up on his facts.
 
Can Anyone tell me what Design Category Kitsap County State of Washington, Bremerton Area is? I know that according to the 2003 IBC it is either D1 or D2
 
Ask him what code he's referring to and then look it up. Seismic zones exist only as defined by a building code or other standard; they aren't stripes painted on the ground. You could always write "Bubba's Building Code" with zones from 1 to 99 or whatever you wanted.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor