Feb 27, 2013 #1 YuriB Electrical Mar 18, 2009 75 For what typical pressure drop per unit of lenght in water pipes are desingned air heating/ cooling systems ?
For what typical pressure drop per unit of lenght in water pipes are desingned air heating/ cooling systems ?
Feb 27, 2013 #2 bimr Civil/Environmental Feb 25, 2003 9,369 The headloss will be approximately 5-6 psi per 100 ft of pipe. If you use high velocities, you may create noise issues. Upvote 0 Downvote
The headloss will be approximately 5-6 psi per 100 ft of pipe. If you use high velocities, you may create noise issues.
Feb 27, 2013 Thread starter #4 YuriB Electrical Mar 18, 2009 75 So, like in air ducts - with the ratio of water to air densities. Upvote 0 Downvote
