Aug 21, 2003 #1 lwazi Mechanical Joined May 15, 2003 Messages 3 Location ZA need a pump that is able to suck water from underground pit with a flowrate not less than 143m/h.
Aug 22, 2003 #2 Montemayor Chemical Joined Apr 6, 2001 Messages 1,436 Location US lwazi: You are telling us that you need a fairly common size, vertical, well pump. Do you want us to know something else? Art Montemayor Spring, TX Upvote 0 Downvote
lwazi: You are telling us that you need a fairly common size, vertical, well pump. Do you want us to know something else? Art Montemayor Spring, TX
Sep 1, 2003 #3 hans8888 Nuclear Joined Aug 31, 2003 Messages 1 Location CA Is there any piping system involved? Or you just follows what Montemayor said. Hans in Kitchener,Ontario Upvote 0 Downvote
Is there any piping system involved? Or you just follows what Montemayor said. Hans in Kitchener,Ontario
Sep 6, 2003 #4 samiitkgp Chemical Joined Sep 6, 2003 Messages 1 Location IN As the flow rate is quite high, i think it has to be a centrifugal pump. Now, the choice depends on the readily available pump manufacturer's specification. Better consult any textbook. find out about NPSH and other stuff. NO PAIN, NO GAIN!! Upvote 0 Downvote
As the flow rate is quite high, i think it has to be a centrifugal pump. Now, the choice depends on the readily available pump manufacturer's specification. Better consult any textbook. find out about NPSH and other stuff. NO PAIN, NO GAIN!!