Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TwinCam 32 NC generator

Status
Not open for further replies.

Demo

Industrial
Joined
Jan 16, 2002
Messages
6
Location
GB
Hi Ya

One of my manufacturers uses some kind of cnc machine (never seen it and not really my field) for machining wood for us. The thing is we want to streamline some processes and want to be able to squirt my solidworks drawings stright into his machine and let it do its thing. The thing is it mentions using DXF files and to set the colours of drawings to different colours depending on the work to be carried out, ie red for cuts, yellow for holes (or something). Is anyone aware on how to achieve this via solidworks, any help wil be appreiciated.
Cheers
 
You have to export out your DXF file then open the DXF back up in SW then you can change the lines and any of them onto it's own layer. You also might look into using a Map file (Located under the options button when saving as a DXF.

Regards,

Scott Baugh, CSWP[wavey3][fish]
3DVision Technologies
faq731-376
 
cheers SBaugh, could be the ticket, fingers crossed
 
CNCs are different...

Our CNCs use IGS files, as well as .dxf, and our parts come out great. May be worth the effort to find out other files the CNC will accept and export your model to the compatable format.

Bonus to this type of process aides protyping...no need for drawing.

There are a number of exportable file types...experiment and have fun!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top