Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
turn of the nut proceedure on a 1-1/2" stud
- Thread starter jbar1
- Start date
Hydraulic wrenches will probably be your best bet. Here is a web-site to a popular one, there are many others and plenty of places rent them...
Another method you may want to consider, if the torque required on the nut is large, is stud tensioning. Really is a superior method to torquing a nut.
Another method you may want to consider, if the torque required on the nut is large, is stud tensioning. Really is a superior method to torquing a nut.
tothepoint
Mechanical
Take a look at jack-bolt nuts like Superbolt.
- Status
Similar threads
- Question
- Question
- Question