I have used this package several times successfully between two computers both running windows XP-32. It would be very useful to be able to use it between my computer and a colleague in the far east, but he is running XP64 and can't seem to get it to install. Does anyone know if there is a way to get this to run on XP64?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
TurboVNC
- Thread starter richkeogh
- Start date
- Thread starter
- #2
Most 32-bit programs will run happily on 64-bit systems using 32-bit compatibility mode or an emulation layer, but they need to be installed into the Program Files(x86) folder and the relevant registry entries reflect this.
I would contact Sun Microsystems and see if they do a suitable installer or can offer a workaround
Trevor Clarke. (R & D) Scientific Instruments.Somerset. UK
SW2007x64 SP3.0 Pentium P4 3.6Ghz, 4Gb Ram ATI FireGL V7100 Driver: 8.323.0.0
SW2009x32 SP1.0 Pentium P4 3.6Ghz, 2Gb Ram NVIDIA Quadro FX 500 Driver: 6.14.11.7751
- Status