rQuestionEngineering
Mechanical
Turbocharger tension rod. How does it work ?
Anyone got a cross section sketch of this or a procedure ?
Anyone got a cross section sketch of this or a procedure ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Turbocharger tension rod. How does it work ?
- Thread starter rQuestionEngineering
- Start date
- Status
TugboatEng
Marine/Ocean
In your picture it appears they are using a hydraulic jack to push the turbine on to the shaft. It is an adaptation of the SKF OK coupling system.
A similar process is used to fit propellers on ships.
It's also possible they are tensioning the nut that retains the turbine.
That is also a SKF product.
A similar process is used to fit propellers on ships.
It's also possible they are tensioning the nut that retains the turbine.
That is also a SKF product.
- Thread starter
- #3
TugboatEng
Marine/Ocean
No, you have not given us any useful information.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Question
