Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TSC2007 response spectrum ordinate value

Status
Not open for further replies.
JoeH78

JoeH78

Structural
Joined
Jun 28, 2011
Messages
139
Location
TR
Dear All,

In Etabs 2013 Turkish Seismic Code 2007 response spectrum function is defined, but when I check the RSF from the code directly it shows that the default values are not correct, as if all point values on function are scaled by 1/20 (horizontal part which was supposed to be 2.5) and some portions of function are not conforming with RSF in the code,

Does anybody can shed a light on that?

Regards,
 
Status
Not open for further replies.

Similar threads

StructuralAddict
  • Locked
  • Question Question
Response Spectrum Scale Factor
Replies
2
Views
2K
StructuralAddict
StructuralAddict
Moam93
  • Locked
  • Question Question
Scaling Response spectrum with equavlient static with ETAPS API
Replies
2
Views
367
Moam93
Moam93
WayneRuin10
  • Locked
  • Question Question
Etabs Equivalent Lateral Force vs Response Spectrum analysis Base Shear
Replies
6
Views
1K
JoshPlumSE
JoshPlumSE
h-badawy
  • Locked
  • Question Question
Calculation of sway and non-sway for K value
Replies
5
Views
1K
h-badawy
h-badawy
Farshid aMIRI
  • Locked
  • Question Question
Inconsistency between Load combination Value and the Values that used for Design
Replies
0
Views
304
Farshid aMIRI
Farshid aMIRI

Part and Inventory Search

Sponsor

Back
Top