Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tsai-wu in 2D

Status
Not open for further replies.
lavecchiasignora

lavecchiasignora

Structural
Joined
Mar 3, 2011
Messages
48
Location
SE
Hi all,

Is there a way to plot the Tsai-Wu failure criteria in ansys APDL in 2D? When defining failure criteria I have to specify the strenghts in z-direction but since Im only working with shell elements consisting of layers of small thickneses I just want to calculate the Tsai-Wu in 2d and not 3d.

thank you

 
Status
Not open for further replies.

Similar threads

Algirdas13
  • Locked
  • Question Question
Problem with plastic deformation (Plateau) in 2D model
2
Replies
21
Views
2K
SWComposites
SWComposites
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
D
  • Locked
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957
netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV

Part and Inventory Search

Sponsor

Back
Top